Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

Conductive Silicone Moulding Parts

Conductive Silicone Moulding Parts

Prototypes manufacture industry, in addition to the commonly used plastic material processing, we can also use a called silicone material processing, the characteristics of the silicone prototypes for: silica gel thin viscosity, good operation, not deformation, not shrink, easy to dismantle,...

Send Inquiry

Product Details

Prototypes manufacture industry, in addition to the commonly used plastic material processing, we can also use a called silicone material processing, the characteristics of the silicone prototypes for: silica gel thin viscosity, good operation, not deformation, not shrink, easy to dismantle, mold surface is smooth, the simulation effect is good.But there is a place to be noticed: silicone parts cannot be made of silicone molds, and if silicone molds are used, the silicone fluid will stick to the mold, thus affecting the molding.So, in general, making a silicone  prototype requires a simple mold of aluminum or other metals.

 1-1612011FGB49.jpg1-1612011FP0407.jpg

Production process of silica gel prototypes:

Design of drawings

Drawings are generally according to the customer provide the sample size of drawing, production drawings, generally using ProE software production, such as customer can not provide sample, we can according to customer's request, cooperate with clients for free finish drawing design and production.

Open mould

The mold is made by the mold maker according to the design of the drawing, and then use the offset to carve the copper work, and then the copper engraving the steel mold.Some of the handicraft mold production technology content is relatively high, the time is also relatively longer;It is generally calculated by five days.The molds are ready to be made.

1-1612011A952461.jpg


Color mixing

According to the color code of the international pantone color card specified by the customer, our company has a very small chromatic aberration.

1-1612011F6239C.jpg


On the mold production

After the mold is finished well is the machine production.After the mold is installed, the machine needs to be heated up.


1-1612011F015940.jpg

The quality

After the conductive silicone hand plate is produced, it will be inspected and checked, mainly to see whether the products are in conformity with the specifications. If not, all of them will be treated as waste.

201803071657259789341.jpg

trimming

After the quality inspection department has passed the inspection, the product will be delivered to the back process department for trimming.

Coordinate measuring machine for inspection as below:

201803071644508435910.jpg


Shipping by various methods:

HTB1rjEQc0zJ8KJjSspkq6zF7VXaX.jpg



Inquiry