Plastic Transparent STL Mold Injection Parts
2fprototypes Advantages 1. 15 years experience in prototype and tooling manufacture 2. Own two factories: metal factory & plastic factory 3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling 4. Professional and various finish treatments 5. Best price and good service 6. Quote quickly and project...Send Inquiry
1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal factory & plastic factory
3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments
5. Best price and good service
6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed
The design considerations for the yoke template are as follows:
(1) the yoke plate structure and parts of the middle block fitted with mining or light coordination, such as mining pressure will change with the yoke plate.
(2) the retention function of the yoke plate and lump part must have sufficient rigidity to withstand the lateral pressure and surface pressure of the lump. And for the part yoke board ditch and bulk products get close combination, the groove corner made escape gap processing, such as the yoke plate groove made pectin can't escape gap processing, is made of component must block escape gap processing.
(3) the internal shape of the lump should be taken into consideration at the same time, and the datum must be clarified. In order to make the stamping process do not produce deformation, we should also pay attention to the shape of each piece of mass.
(4) when the yoke plate is inserted into many block parts, the pitch is changed due to the machining error of each block, so the solution is to design intermediate block products.
(5) the mold structure of lump part mining and side-by-side combination. As the punching cutting process, the blocky part will bear the lateral pressure to cause gaps between the various pieces of products, or cause the tilting of the bulk products. This phenomenon is an important reason for poor stamping size, punching and so on, so there must be sufficient countermeasures.
(6) fixed yoke plates in the massive parts, according to the size and shape of the following five types: A. with locking screws, B. key to fixed, fixed in C. based shape key D. to shoulder fixed, E. above the pressure pieces (such as the guide plate is pressed and fixed).
Tel: +86 0755-23078283 Skype: sophia778899Wechat: 804826519