Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

ABS Auto Parts Rapid Prototypes PMMA POM PMMA ACRYLIC PEEK PTFE

ABS Auto Parts Rapid Prototypes PMMA POM PMMA ACRYLIC PEEK PTFE

Rapid Tooling (RT ), it’s a particular shape forming tool which have a certain shape & size & surface precision tools It is mainly used for the mass production, although the production and manufacturing cost of the mold is little bit high, however, as the mass production, the cost of...

Send Inquiry

Product Details


Rapid Tooling (RT ), it’s a particular shape forming tool which have a certain shape & size & surface precision tools

It is mainly used for the mass production, although the production and manufacturing cost of the mold is little bit high,  

however, as the mass production, the cost of each product is greatly reduced.

In order to meet our customer required schedule, speed up the progress of product development and validation,  

our factory could be able provide at once within 100-1000 set of rapid toolings.

blob.png

2fprototypes has made several design and construction changes using carefully selected materials in order to offer our customers the best combination of performance, longevity and value. The most significant difference is the change to using 30% Glass reinforced polyethylene (or PET) for molding of the cap itself. This material which is more commonly known by its trade name of DuPont Rynite offers far superior dielectric strength (better insulator to stop electrical arcing) and does not absorb moisture from the atmosphere as readily as PBT, the old material used. (Many of our competitors are still using this material in their caps). Secondly, OEM has made actual dimensional changes to add insulation around key failure points on the vehicle manufacturers design. The visibly thicker insulation around the contacts on the underside of the cap is a visible change you can show to installers in a key failure area. Last, OEM is keeping the Aluminum contacts because it offers superior resistance to corrosion OVER Brass in this very unique case. Please check out OEM's Technical info/ bulletin "PB5" to get more information.

blob.png

The prototypes can be divided into manual prototypes and CNC prototypes as accordance the difference production.

(1) manual prototypes: its main workload by hand.

(2) numerical control prototypes: its main processing by numerical control machining, and according to difference of the equipment used, it’s also could be divided into RP Rapid Prototyping and CNC Prototyping.

A: RP prototypes: it is mainly produced by laser rapid prototyping technology.

B: CNC prototypes: it is mainly produced by the machining center.

The RP prototypes is quite different to CNC prototypes.

The advantages of RP are mainly shown in its rapidity, but it is mainly formed by stacking technology. Therefore, RP prototypes is generally relatively little bit rough, and it has certain requirements for the parts wall thickness, for example, wall thickness is too thin to p

blob.png


Sophia Li


Sales Marketing
Tel: +86 0755-23078283  Skype: sophia778899

Wechat: 804826519
Email: quote@2fprototypes.com


Inquiry