Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

PP Prototypes Vacuum Casting Process Small Batch

PP Prototypes Vacuum Casting Process Small Batch

PP prototypes Material : PP /Siliocne/ rubber/ABS/PC Machining Method : Vacuum Casting Surface treatment : as machine Min.Order Quantity:1 Piece Lead time :7-15 around working days Payment Terms : TT, pay pal, LC,other available terms Delivery way : DHL/UPS/Air freight/Sea around 3-15days...

Send Inquiry

Product Details

PP prototypes


Material : PP /Siliocne/ rubber/ABS/PC
Machining Method : Vacuum Casting

Surface treatment : as machine
Min.Order Quantity:1 Piece
Lead time :7-15 around working days
Payment Terms : TT, pay pal, LC,other available terms
Delivery way : DHL/UPS/Air freight/Sea around 3-15days arrived

86.jpg


The technology has greatly reduced the development cost, cycle and risk of the product because of its fast speed and low cost.The materials for making silicone mold are: domestic silica gel, imported silica gel, transparent silica gel, special silica gel.Material: domestic PU, imported PU, transparent PU, soft PU, steel, ABS, PP, PC, high temperature ABS, etc.


Precoated type laminating machine is a special equipment that combines printed matter with precoated plastics.Compared with the coating machine, its most characteristic is that it has no glue coating and drying part, so it has compact structure, small size, low cost and easy operation.
Nonferrous metal laminating machine.
Nonferrous metal laminating machine.
Good stability of product quality.
Precoat type laminating machine by precoating plastic film to print, automatic input, hot pressing composite, automatic winding of four main parts, as well as the mechanical drive, prepainted longitudinal and plastic film flattening, cutting, computer control system and other auxiliary equipment.


1. Print the input part of automatic transmission structure can ensure printed matter not overlap in transmission and isometric into composite parts, general control is realized by using pneumatic or friction way, delivery accurate, high precision, small print in a composite wide, also can meet the above requirements.


2. The composite part includes the composite roller and the roller group.The composite roller consists of the pressure roller of the silicon heating pressure roller.The hot pressure roller is a hollow roller with internal heating device. It has hard chromium on the surface and is polished and polished.The temperature of the hot roller is tracked by the sensor and the computer is calibrated at any time.The adjustment of compound pressure adopts eccentric CAM mechanism, and the pressure can be adjusted without grade.The pressure roller group is basically the same as the composite roll group, which is composed of the chromium plated pressure roller and the silicon rubber pressure roller, but without the heating device.Calender roller group, is the main purpose of precoating plastic film with print after composite roller group composite, surface brightness is not high, then through the calender roller group second extrusion, surface brightness and bonding strength greatly improved.


3. The transmission system of high power motor drive system is controlled by computer, after primary gear reduction through level 3 chain transmission, drive into the movement and the composite part of the paper and the calender silicone pressure roller rotation.The pressure roll group maintains proper working pressure under the pressure of stepless adjustment.


4. The computer control system of computer control system adopts the microprocessor, and the hardware configuration is composed of the motherboard, the digital keypad, the optical isolation board, the power board, the step motor power driver board and so on.


复模 (2).JPG


复模3.JPG



Three dimensional QC inspection by as below machine:


6.jpg


2f Prototypes is one of  most experienced prototype manufacturers .located in

Shenzhen ,China .we specialized in rapid prototyping by CNC,SLA,SLS and Vacumm

casting and plastic injection molding.

Advantage :

1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal  factory & plastic  factory

3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments

5. Best price and good service

6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed


Sincerely welcome to contact us if you want inquiry .
Faye’s Email : sales2@2fprototypes.com
        Skype : dflff1984@163.com
       


Express as :


快递2.jpg快递1.jpg


Inquiry