Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

Pump Parts Rapid Prototypes CNC Manufacture Process

Pump Parts Rapid Prototypes CNC Manufacture Process

Pump parts rapid prototypes Material : Aluminium/SS/EN Machining Method : CNC Machining Surface treatment : as machine / polishing Min Order Quantity:1 Piece Lead time :7-15 around working days Payment Terms : TT, pay pal, LC,other available terms Delivery way : DHL/UPS/Air freight/Sea around...

Send Inquiry

Product Details

Pump parts rapid prototypes


Material : Aluminium/SS/EN
Machining Method :  CNC Machining
Surface treatment : as machine / polishing

Min Order Quantity:1 Piece
Lead time :7-15 around working days
Payment Terms : TT, pay pal, LC,other available terms
Delivery way : DHL/UPS/Air freight/Sea around 3-15days arrived


158.jpg


Pump prototypes is a device used to move liquid, gas or special fluid media, which is the machine that works on fluid.It transfers the mechanical energy of the original motive or other external energy to the liquid to increase the liquid energy and to transport the liquid or to pressurize the liquid.The pump is mainly used for conveying liquid including water, oil, acid lye, emulsion, suspension emulsion and liquid metal, etc., also can transport liquid and gas mixture, containing suspended solids liquid.Some pumps can be used as hydraulic pumps, whose main function is to produce high pressure liquid.CNC SLS SLA Vacumm casting tooling.


160-1.jpg


The impeller is mounted in the pump housing and is fastened to the pump shaft 3. The pump rapid prototypes shaft is driven directly by the motor.In the center of the pump case, a liquid suction 4 is connected to the suction pipe 5.Liquid through the bottom valve 6 and suction pipe into the pump.The liquid discharge outlet on the pump case is connected with the discharge pipe 9.Before the pump is started, the pump is filled with liquid that is transported.After start-up, the impeller is driven by the shaft to rotate the high speed, and the liquid between the blades must also rotate.Under the action of centrifugal force, the liquid is thrown from the center of the impeller to the outer edge and obtains the energy, and the outer edge of the impeller enters into the volute pump shell at high speed.In the volute, the liquid slows down due to the gradual expansion of the runner, and then converts some of the kinetic energy into static pressure energy. Finally, the high pressure flows into the outlet pipe and is sent to the required place.When the liquid flows from the center of the impeller to the outer edge, a certain vacuum is formed in the center of the impeller. As the pressure above the reservoir surface is greater than the pressure at the inlet of the pump, the liquid is continuously pressed into the impeller.Thus, as long as the impeller turns continuously, the liquid will be continuously inhaled and discharged.CNC SLS SLA Vacumm casting tooling.


IMG_8292.JPG


126.jpg


Three dimensional QC inspection by as below machine:


三次元.jpg


Certification as :


0001.jpg


2 001.jpg


2f Prototypes is one of  most experienced prototype manufacturers .located in Shenzhen ,China .we specialized in rapid prototyping by CNC,SLA,SLS and Vacumm casting and plastic injection molding.

Advantage :

1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal  factory & plastic  factory

3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments

5. Best price and good service

6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed


Sincerely welcome to contact us if you want inquiry .
Faye’s Email : sales2@2fprototypes.com
        Skype : dflff1984@163.com
       

Express as :


快递3.jpg



Inquiry