Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

Sound Knob Prototype Via CNC Machine Produce

Sound Knob Prototype Via CNC Machine Produce

Sound knob prototypes Material :PA+GF30% Machining Method : CNC Machining Surface treatment : Screen printing Min.Order Quantity:1 Piece Lead time :7-15 around working days Payment Terms : TT, pay pal, LC,other available terms Delivery way : DHL/UPS/Air freight/Sea around 3-15days arrived Rotary...

Send Inquiry

Product Details

Sound knob prototypes


Material :PA+GF30%
Machining Method :  CNC Machining
Surface treatment : Screen printing

Min.Order Quantity:1 Piece
Lead time :7-15 around working days
Payment Terms : TT, pay pal, LC,other available terms
Delivery way : DHL/UPS/Air freight/Sea around 3-15days arrived


101.jpg



Rotary switch potentiometer can be used to replace traditional resistance simulation function of rotating pulse generator, the rotary switch are normally used in the instrument front panel and audio control panel man-machine interface, rotary switch orthogonal optical encoder as pure digital device to replace analog potentiometer, the rotary switch on the appearance similar to traditional or resistive potentiometer, but the internal structure of rotary switch completely and use digital optical technology.Similar to traditional incremental encoder products, there are two orthogonal output signals (channel A and channel B), which can be directly connected with the encoder processing chip.


Usually just r&d or design finished products are prototypes needs to be done, hand is the first step to verify the product feasibility, is to find design defect and insufficiency, the defects of products the most direct and effective way, thus to targeted improvement of defect, until can't find less than standard sample from an individual.At this point, usually need to small batch trial-produce and then find out the insufficiency to improve in the bulk.Design products generally can't be perfect, can't even use, direct production once the defective will be scrapped entirely, greatly waste of manpower and material resources and time.And hand in general, is one of the few samples, short production cycle, loss less manpower, quickly find out the shortage of the product design and improvement, provide sufficient basis for product production.CNC SLS SLA Vacumm casting tooling   Screen printing


The rapid prototypes is divided according to the means of production, which can be divided into manual and numerical control handboards:

(1) manual handboard: the main work is done by hand.Hand - made hand board is divided into abs hand board and oil clay hand board.

(2) CNC hand-board: its main work is done by using nc machine tool, and depending on the equipment is different, can divide again for laser rapid prototyping (sla) planks and machining center (CNC) planks and RP's plate (3 d printing.

A: RP hand plate: it is mainly produced by 3D printing technology, and laser rapid prototyping is commonly known as slas, but laser rapid prototyping is one of the 3D printing.
B: CNC hand board: it is mainly produced by the processing center.
The RP pallets are different from those of CNC handboards:
RP's plate mainly manifested in the advantages of quickness, but it is primarily through stacking technology forming, therefore the RP's general relatively coarse, and the wall thickness of products have certain requirements, such as wall thickness is too thin and production.
CNC hand-board embodied in it can be very accurate to reflect the advantages of the drawings of information, and high surface quality of the CNC hand-board, especially after the complete surface spraying and silk-screen, and even more glamorous than open mold to produce the product after.Therefore, CNC hand-board manufacturing is becoming more and more mainstream.


3.png


4.jpg



Three dimensional QC inspection by as below machine:


三次元.jpg


QC.jpg



Certification as :


2 001.jpg


2f Prototypes is one of  most experienced prototype manufacturers .located in Shenzhen ,China .we specialized in rapid prototyping by CNC,SLA,SLS and Vacumm casting and plastic injection molding.

Advantage :

1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal  factory & plastic  factory

3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments

5. Best price and good service

6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed


Sincerely welcome to contact us if you want inquiry .
Faye’s Email : sales2@2fprototypes.com
           Skype : dflff1984@163.com
       


Express as :


快递3.jpg

 

Inquiry