Tractor Drive Parts Rapid Prototypes CNC Machining 5 Axis
Tractor drive parts rapid prototypes Material ： SS/Aluminium/Brass Machining Method ： CNC Machining Surface treatment : as machine / polishing Min.Order Quantity：1 Piece Lead time :7-15 around working days Payment Terms : TT, pay pal, LC，other available terms Delivery way : DHL/UPS/Air...Send Inquiry
Tractor drive parts rapid prototypes
Material ： SS/Aluminium/Brass
Machining Method ： CNC Machining
Surface treatment : as machine / polishing
Min.Order Quantity：1 Piece
Lead time :7-15 around working days
Payment Terms : TT, pay pal, LC，other available terms
Delivery way : DHL/UPS/Air freight/Sea around 3-15days arrived
Tractor parts rapid prototypes is used for traction and drive operation machinery to complete various mobile operating vehicles.Also can do the fixed operation power.It is composed of engine, transmission, walking, steering, hydraulicsuspension, power output, electrical instrument, driving control and traction, etc.The power of the engine is transmitted from the transmission system to the driving wheel to drive the tractor. In real life, rubber belts are often used as the medium for power.transmission.Tractors for agricultural, industrial and special purposes by function and purpose;According to the structure type, type, crawler, boat tractor and self-propelled chassis, etc.rapid prototypes . CNC SLS SLA Vacumm casting tooling .
Driving force.It is the horizontal reaction force of the driving wheel.Therefore, the size of the driving torque Mk on the driving wheel through the transmission system is shown, indicating that the driving force of the tractor is larger.However, since Mk is determined by the power of the internal combustion engine, Pk is also limited by the power of the internal combustion engine.Pk and restricted by soil conditions at the same time, can't infinite increase, because when the soil reaction force that is driving force Pk, increased to a certain extent with soil is destroyed, driving wheel slip seriously, driving force Pk can't increased.We call the soil's maximum reaction to the driving wheel "adhesion."It can be seen that the maximum driving force Pk is limited by the internal combustion engine rate, but also restricted by the adhesion of the soil, and cannot be increased indefinitely.rapid prototypes . CNC SLS SLA Vacumm casting tooling .
The adhesion reflects the ability to produce the maximum driving force between the drive and the soil.There are many factors affecting adhesion, which are mainly related to the ground conditions, tire pressure, size, pattern and the size of the vertical load on the tire.For tractors, under the condition of certain soil, reduce the tire pressure in a certain range, increase tire bearing area and improve the wheels on the holding capacity of the soil, increase the wheels attached weight and so on, to improve the adhesion of the tractor, generally used low voltage on tractor tyres, some tractor adopts the wider tires and high decorative pattern tyres and add counterweight iron on tractor driving wheel, is in order to increase the adhesion of the tractor, increase the ability of tractor traction and measures.But should be noted on the driving wheel and counterweight iron, although can increase the adhesion, but also increased the soil deformation in vertical direction, increased the rolling resistance, so whether to add counterweight iron, but also according to specific conditions of use, weigh the overall effect.rapid prototypes . CNC SLS SLA Vacumm casting tooling .
The maximum adhesion between the tractor driving wheel and the ground and the ability to resist skidding is called the adhesion property of the tractor.If the adhesion performance is good and the driving torque can be fully utilized, the driving torque can be fully utilized, and the capacity of the internal combustion engine can be fully played, rapid prototypes and the tractor is strong at work.If the adhesion performance is poor, skid seriously, cannot make full use of the drive torque, the ability of internal combustion engine can't been fully made use of, strong tractor is at work to not to come out, or tractor without much effort.The driving wheel is badly skidded, which reduces the speed of the tractor, reduces the production and economy, and speeds up the wear of the wheel tires, and the structure of the soil is damaged.rapid prototypes . CNC SLS SLA Vacumm casting tooling .
Three dimensional QC inspection by as below machine:
Certification as :
2f Prototypes is one of most experienced prototype manufacturers .located in Shenzhen ,China .we specialized in rapid prototyping by CNC,SLA,SLS and Vacumm casting and plastic injection molding.
1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal factory & plastic factory
3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments
5. Best price and good service
6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed
Express as :