Trademark Scanner ABS Rapid Parts
2F prototypes factory existing equipment, CNC machining center (55 travel up to 1800 mm), 3 d printers and a fully automatic compound die equipment, we can provide one-stop service of high and new technology company.Because of the complete equipment, it is necessary to ensure that all the...Send Inquiry
2F prototypes factory existing equipment, CNC machining center (55 travel up to 1800 mm), 3 d printers and a fully automatic compound die equipment, we can provide one-stop service of high and new technology company.Because of the complete equipment, it is necessary to ensure that all the information of the guest is not leaked.The company's existing plant area is 1000 square meters;At the same time, we also have a group of industrial design engineers and hand-board model manufacture more than 10 years experience of manual mechanic, will provide valued customers more quickly, more close to the 3D data of hand-board model service.Up to now, we have provided third party prototypes model service for more than seven fortune 500 enterprises.
Advantages of CNC machining
1. High machining accuracy and high machining quality;
2. Multi-coordinate linkage can be carried out to process parts with complex shapes;
3. When machining parts change, it is generally necessary to change the nc program, which can save production preparation time;
4. The machine tool itself has high precision and high rigidity, which can choose favorable processing amount and high productivity (generally 3~5 times of ordinary machine tool);
5. High degree of automation of machine tools can reduce labor intensity;
6. Quantitative production, product quality easy to control;
Why choose 2f protoytpes?
1. The equipment is complete, with 55 CNC machine tools, one 3D printer and automatic multimode equipment.
2. Introduction of American oil spray technology, the appearance of the hand board is more refined, and it looks more elegant.
3. Advanced measurement technology, the error control is between 0.05 and 0.1mm, with high precision.
4. Rich experience, the company has been engaged in the handicraft industry since 2002. After 16 years, the technology has been quite mature.
5. Good reputation, the company's belief in "integrity, quality and efficiency" is recognized by many well-known manufacturers, and they are strongly supported and praised by them.
6. After sales service, there is a special after-sales team, regular return visits, and timely response once problems arise.
CNC machining characteristics
1. Second line hard CNC machining center X, Y, Z triaxial travel: 1000 X 600 X 600mm.
2. The spindle drive mode is belt type, rotating speed: 8000rpm (standard), which can be selected according to the requirements of the customer, with the direct spindle 12000rpm/15000rpm.
3. Select according to the user's needs: the CAM 20 knife fast ATC, or the knife arm 24 ATC, to meet the needs of different customers.
4. The head group is a heavy box type structure.Internal rib reinforcement, high rigidity.
5. The main spindle is used in oil pressure mechanism, and the spindle force is uniform when the knife is used to extend the bearing life.
6. The electrical box is divided into separate design, and the heating source of the controller is separated. The heat exchanger is used to heat the heat exchanger in the front, so as to avoid the external dust entering the electric box;The rear side USES a fan to heat the fan plate.
7. High precision ball screw is adopted in the three-axis, combined with the precision nut preloading and the tail-end pretensioning device, to ensure that the back gap and thermal deformation of the machine are kept at a low value for a long time.
8, X, Y axis adopt linear slide rail, fast moving speed of 24 m/min, the Z axis adopts hard rails, rapid speed of 18 m/min, triaxial chip feed 8/8/8 (m/min), provide high-speed stability of cutting feed.
9. The X and Y axis adopt linear slide track, and the z-axis adopts hard rail, which has high rigidity, low noise, low friction, and can do fast displacement and obtain circular precision.
10. All finished products have been corrected by laser positioning and circle test.To ensure positioning accuracy and servo characteristics.Besides, strict inspection measures should be taken before the machine is delivered to ensure the long-term stability of the machine.
Coordinate measuring machine for inspection as below:
Shipping by various methods：