Categories

Contact Us

2fprototypes Co.,Ltd
Add:No.21 Building, 98 Industrial District, Shajing Town, Baoan, Shenzhen, China
Tel:+86-755-23078283
Ph:+8618929368892
E-mail:info@2fprototypes.com

Surface Finish Painting Plastic Automobile Parts Prototypes

Surface Finish Painting Plastic Automobile Parts Prototypes

Painting is the name of the surface coating process of industrial products, including plastic injection, silk screen printing and printing processing.EVA, rubber and other shoe material change color, silk screen.It can produce high temperature, friction resistance, uv resistance, alcohol and...

Send Inquiry

Product Details

 

5.jpg

 

Painting is the name of the surface coating process of industrial products, including plastic injection, silk screen printing and printing processing.EVA, rubber and other shoe material change color, silk screen.It can produce high temperature, friction resistance, uv resistance, alcohol and gasoline.

Tips For Painting Plastic automobile  Parts:
There's nothing better than a freshly painted car.Unfortunately, after buying the car and hitting the road, their appearance will eventually be worn by weather, sand, gravel and other damaging debris.All of these elements slowly make the plastic parts of the car look worn.As a professional handboard mold company, we will coat them with a coat to make the parts look good, and they can be worn and corroded.

 

6.jpg

 

Tip 1: Before Painting, Isolate the Plastic Parts You’ll Be Working On


It is important to ensure that the rest of the car parts are not damaged or affected when you paint the plastic parts.There are two ways to make sure this doesn't happen after your car painting class.The first and best option is to completely separate the parts and then separate the paint.In this case, it is best to use the second option, and then bring it down to the surrounding area of the car.This will create a safety barrier between the rest of the car parts and the products you use to paint plastic.

 

8.jpg

 

Tip 2: Prepare the Surface of the Plastic Correctly Before  Painting


Before spraying plastic, or doing anything, you must take appropriate steps to prepare the surface.The process of preparing plastic car parts for paint will vary according to the parts.The parts that were painted before will need to be removed.If this part is badly scratched or dented, it may need to be filled to remove any defects.


No matter what the parts are, every plastic surface you apply needs polishing.Sanding helps smooth the surface and removes tiny imperfections.In addition, sanding also creates small cracks in the plastic surface, resulting in more surface area.The larger the surface area, the higher the adhesion of paint and plastics.This will help paint the paint long after you've finished your work.When the plastic is thoroughly cleaned, it must be cleaned and rinsed to remove residual residue.
Sanding before painting is essential for a good job

9.jpg

 

Tip 3: Use an Adhesive When Painting Plastic After Car Painting Courses


Most automotive paint professionals will agree that the key to lasting work when spraying plastic parts is to use plastic adhesive accelerators.The plastic adhesion promoter contains chemicals (different from brands) that are strong enough to open the plastic pores.This makes the new coat more likely to stick to the surface.

 

10.jpg

 

Tip 4: Make Sure to Paint Car Parts in a Clean Workspace


The last thing you want to do with plastic car parts is make sure you install them in a good place.You will want to avoid any room where there may be a lot of dust, particles or dust because the contaminants can be stuck to the primer or paint layer and create imperfections in the paint.You also want to choose a dry and warm room.Too much humidity can affect the drying of the paint, causing it to lose the ability to attach properly to plastic.In addition, a warm working space can also help paint dry and maintain a steady speed.

7.jpg

 

2f Prototypes is one of  most experienced prototype manufacturers located in Shenzhen ,China.We specialized in rapid prototyping by CNC,SLA,SLS and Vacumm casting and plastic injection molding.


Advantages :
1. 15 years experience in prototype and tooling manufacture
2. Own two factories: metal factory & plastic  factory
3. Services: CNC/SLA/SLS/Vacuum Casting/Tooling
4. Professional and various finish treatments
5. Best price and good service
6. Quote quickly and project completed effectively
7.ISO 9001:2015 &ISO/TS16949 passed

 

19.jpg

 

9.jpg8.jpg

 

28.jpg

 

34.jpg

 

16.jpg

20.jpg

Inquiry